Waring Pro JEX328 - Manual (Page 3)

4 5
A UNIQUE NUTRITIONAL EXPERIENCE AWAITS
YOU AND YOUR FAMILY
Raw juices derived from fresh fruits and vegetables are
invaluable as an aid in maintaining a balanced diet. Raw
juice in its most natural and complete form contains precious
vitamins, minerals, bioflavonoids and enzymes. Nutritional
authorities claim that raw juice in food is one of its most easily
digestible forms.
Be sure to use your Waring Pro ® Juice Extractor daily, or as
often as you can manage, according to the recommendations
in this instruction manual.
Because of the cleansing and rebuilding properties contained
in juices, it is recommended that you use juices in small
amounts the first week and then gradually increase amounts
as you can comfortably enjoy them.
Vegetable juices can be mixed, but if fruit juices are added, do
not use more than one kind.
We recommend that juices be taken alone, between meals,
and at room temperature – not with meals.
For further information on the consumption of juices, we
recommend that you visit your health food store or bookstore
and pick up one or more of the many juice books available on
this subject.
The Waring Pro
® Juice Extractor is the result of intensive
research and scientific developments, and we are sure you
will be delighted with its performance.
USING THE JUICE EXTRACTOR
1. Place unit on level, dry surface.
2. Prepare fruits or vegetables. If skin is not removed, wash well.
3. Cut up fruits/vegetables as necessary to fit into the feed tube.
4. Make sure stainless steel juice collector cup is in position.
5. Plug in and turn on.
6. Place fruits/vegetables into feed tube one at a time.
PARTS
1. Pusher
2. Feed tube and cover
3. Strainer basket with
shredder disk
4. Pulp collector with juice spout
5. Motor housing
6. Power switch
7. 32 oz. stainless steel
juice collector cup
8. Cleaning brush for
strainer basket
IMPORTANT UNPACKING INSTRUCTIONS
Remove your new Waring Pro ® Juice Extractor from the
box. With the unit facing you, unlock cover by turning
cover clockwise.
• Remove cover and take out any packaging material used to
protect the shredder disc (part 3).
• Lift and remove strainer basket (part 3).
• Unlock and remove pulp collector (part 4) by turning it clockwise,
then remove.
ASSEMBLY
• Fit the pulp collector (4) on top of the motor housing (5) and lock
into place.
• Place strainer basket with shredder disk (3) inside pulp collector
(4) over drive coupling.
• Place cover and feed tube (2) over pulp collector (4) with the nose
just left of the juice spout.
• Lock cover and feed tube (2) by twisting counterclockwise until it
snaps shut and the nose lines up with the juice spout.
1
2
3
8
7
6
5
4