Waring Pro PJE401 - Manual (Page 3)

8. Do not use outdoors.
9. Do not let power cord hang over edge of table or
counter, or touch hot surfaces.
10. Always make sure juice extractor cover is secure
beneath spring clips before motor is turned on. Do not
loosen cover while juice extractor is in operation.
11. Be sure to turn switch to OFF position and unplug from
outlet after each use of your juice extractor. Make sure
the motor stops completely before disassembling.
12. Do not put your fingers or other objects into the juice
extractor feed chute while extractor is in operation.
If food becomes lodged in opening, use plunger or
another piece of fruit or vegetable to push piece of
food down. When this method doesn’t work, turn the
motor off, unplug from outlet and disassemble juice
extractor to move any remaining food.
13. This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock,
this plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electri-
cian. Do not modify the plug in any way.
IMPORTANT NOTE:
For your safety and protection,
this juice extractor is equipped with a thermal protec-
tor. Should your juice extractor overheat, the motor will
automatically shut off. To restart, follow these steps:
• Move the toggle switch to the OFF position.
• Unplug juice extractor from electrical outlet.
• Let motor cool down for approximately 5 to
10 minutes.
• Once the motor has cooled down, plug unit into
electrical outlet.
• Move toggle switch to ON position to continue
juicing.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2