How to use your waring pro, Professional deep fryer, Cleaning & maintenance instructions – Waring Pro DF55 User Manual

Page 4

Advertising
background image

5

6

HOW TO USE YOUR WARING PRO

®

PROFESSIONAL DEEP FRYER

1.

This appliance is designed for household use only.

It is not intended for commercial use.
2. Before you use the Waring Pro

®

Professional Deep Fryer

for the first time, remove all packaging materials and follow

cleaning instructions in this book.

3. Lift off lid covering oil container.
4. Remove basket from oil container. Attach handle to basket

by squeezing posts and assembling as in diagram.

5. Pour approximately 2 quarts of good quality vegetable, corn,

canola, soybean, or peanut oil into reservoir until it reaches

a level between the “Min” and “Max” marks inside the

container. DO NOT OVER- OR UNDER-FILL. DO NOT MIX

OILS.

6. Put lid on deep fryer.
7. Attach breakaway cord to the back of the appliance,

then plug into outlet.
8. When unit is plugged in power light will turn on.
9. Set the temperature control knob to the desired

temperature. The oil Ready light will turn green once the oil

has reached the desired temperature.

10. Lift lid and place basket onto hook in oil container. Put food

into basket. Do not exceed the MAX fill line on the basket.

Lower basket into oil and replace lid.

11. When recommended frying time has elapsed, raise the

basket to see if the food has reached the required golden

color. If the food is done, carefully lift and hang basket on

hook inside the oil container. Allow oil to drain 10 to 20

seconds. Open lid, remove basket, and place cooked food

onto absorbent paper towels. NOTE: To preserve oil quality,

do not add salt or spices to the food until after it has been

removed from the fryer.

12. When cooking is finished, turn temperature control to

standby. Unplug the breakaway cord from the wall outlet

before detaching from the appliance.

CLEANING & MAINTENANCE INSTRUCTIONS

1. Always unplug appliance, detach the breakaway cord and

let the oil cool down to room temperature before cleaning.

2. Remove lid.
3. Lift out basket.
4. The control panel should never be immersed in water or

other liquids. Clean the outer surface of the heating

element with a damp cloth containing mild soap solution

or plain water.

5. Once oil has cooled, use spout on the corner to pour oil

into suitable container.

6. The frying basket should be hand washed before first

use and should be seasoned in oil before going into the

dishwasher for the first time. Lid and oil container are

dishwasher safe. Dry parts thoroughly after cleaning.

7. The stainless steel body is submersible and should be

washed by hand with warm soapy water.

8. Ensure that both the lid and the oil container are

completely dry after washing and before use.
9. After cleaning, reassemble oil container, heating element,

basket and lid onto deep fryer. The heating element must

be seated properly or appliance will not operate.

10.

Warning: When cleaning, use care – under-edge of

deep fryer is sharp.

11. For storage, basket handle can be folded down to fit

inside container.
12. Tip: For ease in cleaning, wipe control panel with damp

microfiber cloth. Microfiber cloths are available in most

kitchenware stores.

NOTE: Oil staining on the heating element and oil

container can be easily cleaned with a plastic

scrubbing pad.

13. Any other servicing should be performed by an authorized

service representative.

Advertising