Waring Pro WTO450 - Manual (Page 8)

8
USE AND CARE
Oven Rack Position
Note: Rack must be in the UP Position (C) to accommodate
the baking pan.
Check that the crumb tray is in place and that there is nothing in
the oven. Plug power cord into the wall outlet.
To Use the Bake Function
Step 1. Turn the Function control to Bake position and
Temperature control to desired temperature. The oven
indicator light will turn on after the timer is set. If not
using the timer, turn Timer/Shade Control Function to
Oven On.
Note: Oven rack is not required for use with baking pan.
Simply slide baking pan into position.
Timer: To use the timer, set the knob to the desired
time, up to 30 minutes. To set the timer less than 20
minutes, turn the knob past the 20-minute mark, then
back to desired bake time.
Step 2. Preheat oven for 5 minutes at desired temperature with
oven rack in place.
Step 3. Place baking pan with food inside oven.
Step 4. When baking is complete, open door completely and
remove baking pan.
Step 5. Turn Function control to OFF. Turn Temperature control to
MIN, turn Timer/Shade Control to OFF.
To Use the Broil Function
Step 1. To broil most items, place rack in position C.
Step 2. Set Temperature and Function controls to Broil.
Step 3. Set Timer/Shade Control to ON or to desired time.
Step 4. Attach baking pan to base of oven/broil rack by sliding