Wasp Barcode Inventory Control - Manual (Page 365)

InventoryControl Printable Help
Above, having entered a value for Pallet and a value of 30 for Qty on the previous screen for the first
Move, this screen is ready to receive inputs for another Move. Item #, Location, PO and Supplier
values for this second Move will be the same as those supplied at the beginning of the loop.
While looping on this Tracked By field, all that is required for each Move are values for Qty and Pallet.
The Total Qty is incremented each time an Move is submitted while looping.
Press the ENT key to submit the Move transaction and continue looping
or
Press the F4 key to exit the loop.
When looping on a Tracked By field, all items entered should have the same Tracked By requirements. If
a different Tracked By field is required, you will be prompted to enter the information before continuing.
Looping will need to be restarted.
350