Brother FAX-1960C - Manual (Page 75)

59
10
10
Remote fax options ARE NOTavailable for
color fax.
You can use only one remote fax option at a
time.
Fax Forwarding
10
The fax forwarding feature lets you
automatically forward your received faxes to
another machine. If you choose
Backup Print:On the machine will also
print the fax (this is a safety feature in case
there is a power failure).
a
Press Menu, 2, 5, 1.
1.Fwd/Page/Store
b
Press a or b to choose Fax Forward.
Press OK.
The LCD will ask you to enter the fax
number you want your faxes to be
forwarded to.
c
Enter the forwarding number (up to 20
digits).
Press OK.
d
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
When Fax Forwarding is turned on your
machine will only receive black & white
faxes into memory. Color faxes will not be
received, unless the sending machine
converts them to black & white before
sending.
e
Press Stop/Exit.
Paging
10
When you choose Paging, your machine
dials the pager number you have
programmed, and then dials your Personal
identification Number (PIN). This activates
your pager so you will know that you have a
fax message in the memory.
a
Press Menu, 2, 5, 1.
1.Fwd/Page/Store
b
Press a or b to choose Paging.
Press OK.
c
Enter your pager phone number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
d
Do one of the following:
„ If your pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
and then enter your fax number
followed by # #.
Press OK.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5
5 6 7 8 9 # #.
„ If you do not need a PIN, press:
Redial/Pause, and then enter your
fax number followed by # #.
Press OK.
For example, press:
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
e
Press Stop/Exit.
Remote fax options
10