Waters Styragel Columns - Manual (Page 10)

[ Care and Use ManUal ]
Styragel Columns 10
Table 6. Conditions and sample for 7.8 mm for Column Efficiency Test:
HT Columns1
Table 7. Conditions and sample for 4.6 mm for Column Efficiency Test:
HT Columns1
Figure 6. Tangent Method for Calculating Column Efficiency
N = 16 (tR/w)
2
tR = Elution distance from injection point to the peak
apex on the chart paper.
W= Peak width of marker measured where tangents
drawn on peak intersect baseline (same units as tRj.
Column Type Toluene THF DMF
Flow Rate
(mL/min)
HT 3 ODCB Acetone Acetone 2.0
HT 4 ODCB Acetone Acetone 2.0
HT 5 ODCB Acetone Acetone 2.0
HT 6 DCHP Acetone Acetone 2.0
HT 6E DCHP Acetone Acetone 2.0
Column
Type
Toluene THF DMF
Marker
Flow Rate
(mL/min)
Marker
Flow Rate
(mL/min)
Marker
Flow Rate
(mL/min)
HR 3 ODCB 0.3 Acetone 0.3 Acetone 0.3
HR 4 ODCB 0.3 Acetone 0.3 Acetone 0.3
HR 5 ODCB 0.3 Acetone 0.3 Acetone 0.3
HR 6 DCHP 0.3 Acetone 0.3 Acetone 0.3
HR 6E DCHP 0.3 Acetone 0.3 Acetone 0.3
Table 8. Test Condition and Sample for Efficiency Test 7.8 mm HMW
Columns
Column Type Toluene THF DMF
Flow Rate
(mL/min)
HMW 7 DCHP Acetone Acetone 2.0
HMW 6E DCHP Acetone Acetone 2.0