Remove the drive carrier, Remove the new hard drive from its packaging, Install the new drive into the drive carrier – Western Digital WD ShareSpace User Manual User Manual
Page 184: A) insert the new drive into the drive carrier
Advertising
REPLACING A DRIVE - 179
WD SHARESPACE
USER MANUAL
(b) While pulling out the drive assembly with one hand, use your other hand to support the drive
while sliding it out of the enclosure.
7. Remove the drive carrier.
(a) Flex the back pin of the side rail from the hard drive and gently pull the side-rail away from the
hard drive.
(b) Remove the drive from the drive carrier.
8. Remove the new hard drive from its packaging.
9. Install the new drive into the drive carrier.
(a) Insert the new drive into the drive carrier.
(b) Flex the left and right-side rail and insert the pins into the drive’s mounting holes.
Advertising