BSS Audio 9014 - Manual (Page 4)

125
Soundweb
TM
Rear panel connections
The unit has the following connections on the rear face:
Power
Phoenix socket: Power supply to or from a 9011 power interface.
Barrel socket: Power supply from a Z-999-PSU power supply.
Network
Signal at the network socket is in electrical form.
The network socket is bi-directional, so information can pass in and out of the 9014 unit
through this connection simultaneously. It is also auto-sensing, meaning that it can be
connected to either an OUT or an IN socket on one of the other Soundweb series units.
Fibre-in/out
Signal at the fibre in/out sockets has been converted to an optical format.
Information arriving from a Soundweb unit at the network socket is passed through the
9014 for conversion, and out of the fibre out socket.
Information arriving at the fibre in socket is passed through the 9014 for conversion and
out of the network socket.
Front panel LED functions
The unit has three LED indicators showing:
Power
Steady - This indicates the power supply is functioning.
Fibre-in
Steady – Data is arriving on the fibre input.
Intermittent – You have exceeded the optical power budget by either exceeding the
maximum fibre length or by having too much attenuation in fibre splices. See the
specification section.
Cable-in
Steady – Data is arriving on the cable.