Western Digital My Net N900 Central User Manual - Manual (Page 18)

2
3
1
GETTING STARTED
14
MY NET N900 CENTRAL
USER MANUAL
1. Connect the power cable to the router’s DC connector and into an AC power outlet.
Press the On/Off button on the back of the router once to turn it on. The four LEDs on
the front panel of the router light up one by one as it boots up.
2. Connect the included yellow Internet (Ethernet) cable to the router’s Internet port and the
modem.
Note: One Ethernet (network) cable is included in the product package. You can
purchase additional cables from the WD Store or another source.
3. Using Ethernet cables, connect network devices or computers to the router’s unused
Ethernet ports.
4. Continue to “Configuring a New Router” on page 15.
Connecting to the Router Wirelessly
If you are using a desktop computer with a wireless card or a laptop computer with wireless
capability, you can connect wirelessly to the router immediately. The same is true of mobile
wireless devices with Wi-Fi enabled.
1. Make sure your computer's Wi-Fi is turned on.
2. From the list of wireless networks on the computer’s or device’s screen, select the
WesternDigital network and connect. By default there is no password. Continue to
“Configuring a New Router” on page 15.