Wintec PCI Wireless-N - Manual (Page 9)

FileMate Wireless-N PCI Adapter
Chapter 2 Installation Guide for Windows
2.1 Hardware Installation
1. Make sure the computer is turned off. Remove the expansion slot cover from the computer.
2. Carefully slide the FileMate Wireless-N PCI Adapter into the PCI slot. Push evenly and slowly
and ensure it is properly seated.
3. Secure the antennas on.
4. Turn on your computer. Windows detects the new hardware automatically.
2.2 Software Installation
2.2.1 Overview
The following driver installation guide uses Windows XP as the operating system. The procedures
and screens in Windows 2000 are familiar with Windows XP.
1. The system finds the newly installed device automatically. Click Cancel to close this window.
The Setup steps for Windows 2000 and XP are similar with each other. This user guide uses
Windows XP as the example.
- 9 -