Wood’s Powr-Grip MRTA611LDC2 - Manual (Page 27)

Rev 0.0/4-14 25 MRTA6-DC2: #35072
B5
T
O
R
OTATE THE
L
OAD
E
DGEWISE
Make sure load is positioned correctly on lifter (see T
O
A
PPLY
).
1) Make sure there is sufficient clearance for the load to rotate without
contacting the operator or any nearby objects.
2) Maintain a firm grip on the control handle to keep the load under control at
all times (see figure B5).
Unbalanced loads may rotate unexpectedly when latch is disengaged.
3) Pull the rotation release lever to disengage the rotation latch, and rotate the load to the
desired position as shown.
4) To stop the load’s motion at each quarter turn, simply let go of the rotation release lever so
that the rotation latch engages at the next appropriate stop (see ASSEMBLY: T O C HANGE THE
P
AD
F
RAME
C
ONFIGURATION
: About Secondary Rotation Stops).
Note: Whenever rotation is not required, keep the rotation latch engaged, to prevent
accidental damage to the load and possible injury to the operator.