WORX WU407 1400W vibrafree Reciprocating Saw 240V - Manual (Page 8)

8
1
2
Operating instructions
Note: Before using the tool, read the instruction book carefully.
iNteNDeD USe
The machine is intended for sawing wood, plastic, metal, and building
materials while resting firmly on the workpiece. It is suitable for
straight and curved cuts. When using the appropriate bimetal saw
blades, it is possible to cut flush to the workpiece surface. The saw
blade recommendations must be observed.
kNoW yoUR ReciPRocatiNG SaW
vibrafree ™ ReciPRocatiNG SaW are uniquely designed to
cancel out the saw’s vibration in every load condition. This active
vibration canceling technology makes this saw more comfortable
and easy to use, taking the vibration out of the saw, the workpiece,
your hands and arms, and putting this energy to work sawing and
removing material.
tRiGGeR SWitcH (See fig. a)
Depress the switch to start and release it to stop your tool.
The blade plunger stroke rate can be adjusted from the minimum
to maximum by the pressure you apply to the trigger. Apply more
pressure to increase the speed and release pressure to decrease
speed. (See Fig. A)
vaRiaBle SPeeD Dial (See fig. B) (only for WU407,WU407l)
The strokes per minute can be adjusted just by turning the variable
speed dial. This can be done even while the tool is running. The
control is marked 1 (lowest speed) to 6 (full speed). Turn the speed
1
9 8
2 3 4 5
7
6
8
A
D
G H
I
K L
E F
B
C
6
J