WORX WU370 18V 2.6 Ah Lithium Ion Cordless Hammer Drill - Manual (Page 14)

14
Maintenance
Remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
Environmental protection
This product has been marked with a symbol relating to
removing electric and electronic waste. This means that this
product shall not be discarded with household waste but that
it shall be returned to a collection system which conforms to the
European Directive 2002/96/CE. It will then be recycled or dismantled
in order to reduce the impact on the environment. Electric and
electronic equipment can be hazardous for the environment and for
human health since they contain hazardous substances.
Disposal of an exhausted
battery pack
To preserve natural resources, please recycle or dispose of
the battery pack properly. This battery pack contains Lithium
batteries. Consult your local waste authority for information
regarding available recycling and/or disposal options. Discharge your
battery pack by operating your drill, then remove the battery pack from
the drill housing and cover the battery pack connections with heavy-
duty adhesive tape to prevent short circuit and energy discharge. Do
not attempt to open or remove any of the components.