WORX WU303.1 900W Hammer Drill 240V. 2 Speed 13mm Keyless Chuck - Manual (Page 4)

4
3
4
5
6
7
8
9
10
11
12
13
14
cause personal injury.
Hold power tools by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory contacting
a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Do not use the drill near water.
Do not use the drill as a screwdriver.
Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
Fully unwind extension cords to avoid potential overheating.
When an extension cord is required you must ensure it has the correct
ampere rating for your power tool and that it is in a safe electrical
condition.
Ensure your supply voltage is the same as your tool rating plate
voltage.
Your tool is double insulated for additional protection against a possible
electrical insulation failure within the tool.
Always check walls and ceilings to avoid hidden power cables and
pipes.
After long working periods, external metal parts and accessories could
be hot.
Wear eye protection when operating this tool.
Maintain a firm grip on the handle when you are working. Always use
the auxiliary handles supplied with the tool. Loss of control can cause
personal injury. Symbols
To reduce the risk of injury, user must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice