Yamato Scientific IJ300W Low Temperature Incubator - Manual (Page 36)

32
Handling Precautions
WARNING!
If a problem occurs
If smoke or strange odor should come out of this unit for some reason, turn off the power key
right away, and then turn off the circuit breaker and the main power. Immediately contact a
service technician for inspection. If this procedure is not followed, fire or electrical shock may
result. Never perform repair work yourself, since it is dangerous and not recommended.
Substances that cannot be used
Never use explosive substances, flammable substances and substances that include explosive
or flammable ingredients in this unit. Explosion or fire may occur. (Refer to page45 "List of
Dangerous Substances".)
CAUTION!
Protect samples against drying
The samples should be protected against drying. The fan used for circulation inside furnace of
the unit is always in blowing condition. The samples are easy to be dried especially when the
container of samples is opened. We recommend using the optional air jacket to prevent them
from drying.
Condensation drainage
The cooling device may have condensation
during operation. It is drained through the
port on the base to the plate. Check the
plate sometime to avoid overflow.
Do not step on this unit
Do not step on this unit. It will cause injury if this unit fall down or break.
Do not put anything on this unit
Do not put anything on this unit. It will cause injury if fall.
During a thunder storm
During a thunderstorm, turn off the power key immediately, then turn off the circuit breaker and
the main power. If this procedure is not followed, fire or electrical shock may be caused.
When open/close door…
Do not get close to the traveling range of door when opening or closing it. It may hit your hands
or head and result in an injury.