Zero Gravity Generic Windscreen - Manual (Page 2)

DIY Windscreen Install
2
general install
SPORTBIKE SADDLES & WINDSCREENS
WWW.ZEROGRAVITY-RACING.COM
FIG7 FIG8
FIG9
Fig 10. Be sure to not over tighten and check
that all screws or bolts are securely fastened. Over tight-
ening may crack your fairing or damage the wind-
screen.
Please see www.zerogravity-racing.com
for further information concerning this
product.
Fig 9. Now tighten the windscreen down with the
proper driver starting at the bottom working your way
upwards as described in Fig 8.
Fig 8. Holding the windscreen in place with one
hand, begin threading the new bolts through the fairing
holes into the well nuts. Start this at the bottom and
work upwards in pairs side to side.
Fig 7. Place a new nylon washer provided in the Zero
Gravity well nut kit over the new allen bolt.