Zero Gravity Suzuki GSX650F (2008-2010) & GSX1250FA (2011-Present) Windscreen - Manual (Page 3)

SPORTBIKE SADDLES & WINDSCREENS
WWW.ZEROGRAVITY-RACING.COM 3
180 install
Rev A
FIG8
Fig 7. Remove instrument panel by pulling it apart from the fairing frame. The wire harness needs to be discon-
nected before fully removing. USE CAUTION TO NOT OVER PULL!!!
FIG7
Disconnect
wire harness
Pull Apart
Start from the
tail ends
Remove allen
fastener
FIG 9
Bottom Wellnuts
Remove
wellnut
FIG 9A
Wellnut
Fig 9. Remove 2 allen fastener at the bottom wind-
screen, viewing from the inside fairing.
(For Both Sides)
See FIG9.
Fig 9A. After removing both allen fastener, remove
the wellnut for easier screen removal.
(For Both Sides)
See FIG9A.
Work your way
to the center.
Fig 8. Now you are ready to separate the inner fair-
ing from the bike. Start from the two tail ends and
start dislodging and working your way to the inside.
Suzuki 2011 GSX1250FA & 2008-2010 GSX650F
DIY Windscreen Install