Viewing your video, Transmitter specifications, Receiver specifications – 3D Robotics Video/OSD Kit User Manual
Page 7
Viewing your video
Power your vehicle, and connect the batteries to the transmitter and receiver to
activate your OSD/FPV setup.
We recommend the following devices for displaying the video transmitted by your
3DR Video Kit.
»
FPV monitors are a great, portable solution for viewing your video at the field.
Purchase a monitor/receiver compatible with your kit at
»
Turn your computer into a video capturing platform with
.
(This solution requires an AV male-to-male adapter.)
Transmitter specifications
»
5.8 GHz 200 mW wireless AV transmitter:
»
Transmitter frequency / channel amount: 5705-5945 MHz / 8 CH
»
Output power: 200 mW/33 dBm
»
Frequency control: Built-in frequency & phase lock loop
»
AV input: analog AV signal input
»
ANT connector: RP-SMA
»
Power supply: DC 7-12 volts
»
Current supply: 850 mA
»
Size: 68*26*28 mm
»
Weight: 60 g (including antenna)
»
Gross weight: 85 g
»
5.8GHz Wireless AV Receiver:
»
Receiving Frequency:5705-5945MHz / 8CH
»
Receiving Sensitivity:-90dBm
»
Antenna connector: RP-SMA
»
Power supply voltage:DC 7-12V
»
Supply current: 150mA
»
Dimension: 61*52*13mm
Receiver specifications