Afinia H479 3D - Manual (Page 9)

Afinia H-Series 3D Printer User’s Manual
9
Driver and Software Installation
Mac
Insert the Installation Disc into your Mac. Open the disc, go into the Mac folder, and
double-click the Afinia Mac Setup.pkg icon. Follow the prompts through the installation.
The drivers will be added and the Afinia software will be installed to the Applications folder.
Windows
Insert the Installation Disc into your PC. If the installer does not launch automatically, start
the Afinia H-Series 3D Printer setup.exe file in the PC directory on the installation disc and
install to the specified directory (default is Program files\Afinia\Afinia 3D Printer).
Note: This installs the Afinia H-Series 3D Printer software, the Afinia H-Series 3D Printer
drivers, and the Afinia H-Series 3D Printer sample files into your Program files\Afinia\Afinia
3D Printer folder.
Follow the instructions in the Installer to be sure the drivers and software are all in place
before attempting to use the Printer. The instructions below will follow the same order as
those in the Installer.
Installing the Printer
Mac
Simply connect the Printer to your Mac using the USB connection on the back of the Printer.
Windows Vista, and Windows 7
As part of the installation, the 3D Printer drivers are pre-installed and you will be prompted to
connect the Printer to your PC. The Printer will be recognized and automatically installed when it
is connected to your PC.
Windows XP
Since XP does not have the driver pre-installation ability,
the drivers must be manually installed when the Printer
is connected to the PC. Follow these steps:
A. Connect the printer to a computer with the USB
cable. If the computer displays the “Found New
Hardware Wizard” window, choose No, not this
time, and click the Next button.
B. Choose Install from a list or specific location
(Advanced) and click Next.
USB Connection