Rockwell Automation 20P PowerFlex DC Drive - Frame D, Series B Fan Assembly - Manual (Page 2)

2 Rockwell Automation Publication 20P-IN073A-EN-P - October 2013
PowerFlex DC Drive - Frame D, Series B Fan Assembly
What This Kit Includes • fan assembly, series B (includes fan and mounting bracket)
• Static strap
Tools That You Need • T15 hexalobular screwdriver
• 12.5 mm socket wrench
• Cable ties
• Wire cutter
What You Need to Do To install the fan assembly:
❐ Step 1:
Remove power from the drive
❐ Step 2:
Remove the protective cover and top air flow plate
❐ Step 3:
Remove the existing fan assembly
❐ Step 4:
Install the new fan assembly
❐ Step 5:
Replace the top protective cover and air flow plate and
document the change
Step 1: Remove Power from
the Drive
Remove and lock-out all incoming power to the drive.
ATTENTION: Remove power before making or breaking cable connections.
When you remove or insert a cable connector with power applied, an electrical
arc may occur. An electrical arc can cause personal injury or property damage
by:
• sending an erroneous signal to your system’s field devices, causing unintended
machine motion
• causing an explosion in a hazardous environment
Electrical arcing causes excessive wear to contacts on both the module and its
mating connector. Worn contacts may create electrical resistance.
L1 L2 L3
O
I