Scarlett SC-4143 - Manual (Page 4)

www.scarlett-europe.com SC-4143 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described
in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
· Close supervision is necessary when it is used near children.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not pull, twist, or wrap the power cord around appliance.
· Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the motor stops
completely.
· Do not overload the appliance with food.
· Never place hot ingredients into processor (> 70 ºC) .
FOOD PROCESSOR ASSEMBLING
· Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the housing with a
damp cloth.
· Never immerse motor body in any liquid or wash under running water.
· Place the motor unit on a level surface.
· Place the processor bowl onto the bowl shaft. Make sure the three pillars around the bowl shaft are inserted into the
three slots on the bottom of the processor bowl.
· Please make sure accessories are at their places before switching on.
BLENDER
· Place the blender jug onto the blender gear. Make sure it properly fitted.
· Put ingredients in blender.
· Insert beaker into the lid and then put the lid onto the blender jug. Make sure all parts securely fitted.
· Plug-in device.
· Turn control switch to speed (low speed) or II (high speed), so food processor will work continuously until you turn
back to "0" (switch off a speed).
· Blender could process fruit juices, ice-cocktail, etc.
PULSE MODE
· Turn Speeds control switch at position.
· Press and retain the Pulse button - food processor will operate till this button is pressed.
CAUTION: Do not operate continuously longer than 3 minutes with less than 1 minute intermission (Grinder: 0.5
min / 3 min).
· Do not remove any parts during the operating.
CAUTIONS:
· Avoid operating the empty blender;
· Ingredients must be cut into small pieces before processing in blender jug;
· Never fill blender jug with a liquid over maximum level marked;
· You may add extra ingredients from the top of the jug after taking off the insert;
· When processing is finished, switch off, and then unplug the appliance and wait the motor will stop before removing
food and attachments.
GRINDER
· Load products to be processed in the bowl.
· Screw cutting knife support (clockwise) in the bowl.
· Place the processor bowl onto the bowl shaft. Make sure the three pillars around the bowl shaft are inserted into the
three slots on the bottom of the processor bowl.
· Preferably use the grinder in pulse mode.
CLEANING AND CARE
· Switch off and unplug the appliance.
· Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm sudsy water after
each use. Dry all accessories with a clean soft cloth. Do not use a dishwashing machine.
· Wipe housing with a damp cloth.
· Do not use scouring pads, abrasive and harsh detergents.
AUTO CLEAN SYSTEM
· Pour on blender jug with warm water, add some cleaner and activate AUTO CLEAN mode a few times.
· Repeat this operation if necessary.