Rockwell Automation 1336S_E Drive Multipulse Bridge Assembly - Manual (Page 6)

6 Multipulse Bridge Assembly Parts Kits
Converter Fan Replacement
Kit Where This Kit Is Used
Converter Fan Replacement (Catalog Number 1336-FAN-SP9A) -You
can use this kit to replace any of the fans that are located on the bridge
heatsink in the converter bay of your1336 PLUS II Multipulse or 1336
IMPACT H-Frame drive. The number of fans varies by model.
Table 4. Fan Part Numbers
What This Kit Contains
This kit contains a replacement fan and these instructions.
Locating the Fan(s)
The fans are located on the multi-pulse bridge heatsink in the converter bay
of your drive. Fans are oriented to draw air up through the heatsink
assembly.
Replacement Kit # Vendor #
1336 - FAN - SP9A 21087
Typical Fan
Location