Rockwell Automation 150-C8xP SMC-3 Soft Starter MOV Protective Module Installation Instructions User Manual
Rockwell Automation Equipment
SMC-3
TM
MOV Protective Module Installation Instructions
(Cat 150-C8 _ P)
41053-264-01
DIR 41053-264 (Version 02)
Printed in Korea
41053-264-01
DIR 41053-264 (Version 02)
Printed in Korea
Page 1 (Front)
Page 2 (Back)
WARNING
To prevent electrical shock, disconnect from power source before installing
or servicing.
Protective modules must NOT be mounted on the load side when used with
controllers that use an inside-the-delta motor connection. Installing them
with an inside-the-delta motor connection will result in immediate damage
to the protective module.
Installation
1
Installation (Cont'd)
1
2
3
5
4
2
3
2.3 - 2.5 Nm
20 - 22 lb-in
clic
41053-264
MATERIAL
MATERIAL
MASTER
SIZE
FLAT
FOLD
-01
TWO SIDES PRINTED
BODY STOCK WHITE
BODY INK BLACK
5" W x 4" H
2-1/2" W x 2" H
SMC-3
TM
MOV PROTECTIVE MODULE
INSTALLATION INSTRUCTION SHEET
02
G. Ushakow
03-15-11
1
1
B