Bosch MUZ 4 MX2 - Manual (Page 5)

17
Figure 10.
Assemble the continuous shredder in the
order as shown in figure 9:
1. Insert the disc holder/slinger into
the housing.
2. Select disc to be used and,
making sure that the side desired
is facing upward, place it on disc
holder.
3. Place cover on housing and turn
counterclockwise until cover snaps
into place and arrows are aligned,
see figure 11.
4. The continuous shredder is now
assembled.
5. Place bowl on the power unit.
Depress the release button and
raise arm so that the bowl can be
placed in position, and then lower
the arm to horizontal position.
6. Place continuous shredder on the
mid-speed drive of the power unit,
with the arm in the horizontal
position and turn counterclockwise
until it locks into position.
Placing Slicer/Shredder into Operation
Make sure the power unit is on a smooth,
clean, suitable work surface and switched
to the Off position, “O/Off.” Pull the electrical
cord or unwind the electrical cord to the
necessary length and plug into a convenient
outlet. The continuous shredder is now
ready for use.
Figure 11.
Place items to be sliced, shredded or
grated in feeding funnel and be sure to use
the pusher to feed items into the discs when
in operation.
Learning how to feed food properly into the
feed funnel is the most important factor for
proper slicing and grating: