Bunn Dual Voltage Models Starting at Serial #024477 CDBC - Manual (Page 3)

Page 3
#00658.0000
#00831.0000
29707.1 082803
When re-wiring the machine for operation on
120/208V or 120/240V, the replacement Power
Supply Cord must be UL Listed Flexible Cord Type
SO, SJO, SJTO, HSJO or SJOW, No. 12 AWG, 4
Conductor, Rated 90 ° C. Attachment Plug Cap
must be UL Listed, NEMA 14-20P or L14-20P
Configuration, Rated 125/250V, 20 AMPS. The
Power Supply Cord must be at least 3 feet long
and maximum 6 feet long (measured from Strain
Relief to end of the Attachment Plug Cap.)
! CAUTION
#34072.0000
USER NOTICES
Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should
be kept in good condition. Replace any unreadable or damaged labels.
#29710.0005 (3 Warmers)
CDBC(F)-DV BREWERS
Optional Field Wiring
120 V, 15.0 A, 1800 W
1PH, 2-Wire, 60HZ
Optional Field Wiring
120/208-240 V, 15.6-17.5 A, 2980-3850 W
1PH, 3-Wire, 60HZ
#29710.0007 (3 Warmers)
CDBC(F)-DV BREWERS
Optional Field Wiring
120/208-240 V, 13.0-15.0 A, 2680-3550 W
1PH, 3-Wire, 60HZ
#29710.0008
CDBC(F) APS-DV & TC-DV
BREWERS
#29710.0006 (No Warmer)
CDBC(F) APS-DV BREWERS
Optional Field Wiring
120 V, 12.5 A, 1500 W
1PH, 2-Wire, 60HZ