Rockwell Automation 160 Chassis Mount Series A - Manual (Page 3)

3
BULLETIN 160 CHASSIS MOUNT
1
2
––––––––
97R0174
R. SAVATSKI 12/23/96
40055–175
OF 4
N/A
N/A
N/A
INSTRUCTION SHEET
D. DOBSON 12/23/96
R. SCHLICHT 12/23/96
INTERNAL ENCLOSURE AMBIENT:
EXTERNAL HEAT SINK AMBIENT:
CONTROLLER
CONTROL
160S–AA02P
160S–AA03P
160S–AA04P
160S–AA08P
160–AA02P
160–AA03P
160–AA04P
160–AA08P
160–AA12P
160–BA01P
160–BA02P
160–BA03P
160–BA04P
160–BA06P
7
10
12
15
4
5
10
15
20
4
5
8
15
20
TYPE
(WATTS)
W
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
244 / (9.606)
175 / (6.890)
175 / (6.890)
175 / (6.890)
175 / (6.890)
244 / (9.606)
mm / (inch)
D
mm / (inch)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
63.2 / (2.487)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
54.7 / (2.152)
63.2 / (2.487)
A
mm / (inch)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
214 / (8.424)
145 / (5.709)
145 / (5.709)
145 / (5.709)
145 / (5.709)
214 / (8.424)
TOTAL
20
25
40
70
20
25
40
70
105
25
30
40
65
80
(WATTS)
HEAT SINK
(WATTS)
13
15
28
55
16
20
30
55
85
21
25
32
50
60
WEIGHT
kg / (lbs)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
3.1 / (6.94)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
2.2 / (4.78)
3.1 / (6.94)
IMPORTANT: Bulletin 160 controllers installed in user supplied enclosures are mounted to
allow the heat sink to extend outside the enclosure. Use the information below in combination
with the enclosure manufacturer’s guidelines for sizing. The heat sink is designed to meet
Type 4/4X/12 (IP66) requirements.
Clearances: There must be a minimum of 12.5 mm (0.5 in) around all sides of the control
module, 100 mm (4 in) on the top and bottom of the heat sink, and 50 mm (2 in) on the sides
of the heat sink.
Controller Dimensions
and Specifications

0–50 _C
0–40 _C

108 mm (4.268 in) with DeviceNet accessory.
 Capacitor modules are provided with this model and mount separately.
LENGTH
210
(8.268 in)
CUSTOMER
PANEL
MODULE
A
WIDTH (W)


80 mm
(3.153 in)
DEPTH (D)
(max. heat sink temperature = 90 _C)
REVISION
AUTHORIZATION
DR.
CHKD.
APPD.
DATE
DATE
DATE
INTERLEAF DOCUMENT
THIS DRAWING IS THE PROPERTY OF
THE ALLEN–BRADLEY CO. INC.
AND MAY NOT BE COPIED, USED OR
DISCLOSED FOR ANY PURPOSE EXCEPT
AS AUTHORIZED IN WRITING BY
THE ALLEN–BRADLEY CO. INC.
LOCATION: MILWAUKEE, WISCONSIN U.S.A.
DWG.
SIZE
SHEET
B
1 2 3 4 5 6 7 8
A
B
C
D
E
F
G
H
REFERENCE
DIMENSIONS APPLY BEFORE
SURFACE TREATMENT
(DIMENSIONS IN INCHES)
TOLERANCES UNLESS
OTHERWISE SPECIFIED
.XX:
"
.XXX:
"
ANGLES:
"