Rockwell Automation 160 160 Ser C Custom Firmware P04, FRN 7.06, A005 - Manual (Page 3)

160 Series C Custom Firmware 3
Summary of
Parameter Changes The following parameter changes have been made to the standard 160 Preset
Speed firmware version 7.06 drive.
Parameter
Number Standard Preset Speed
Drive Parameter Name
Custom Firmware Change
30 Accel Time 1 Default changed to 5.0 sec
31 Decel Time 1 Default changed to 5.0 sec
32 Minimum Frequency Default changed to 6 hz
46 Input Mode Input modes “4” and “5” modified (see pages 1 & 2). Default changed to “4”.
47 Output Relay Configure Default changed to “2” (motor running).
52 DB Enable Default changed to 100%
61 Preset 0 Default changed to 6 hz
62 Preset 1 Default changed to 30 hz
63 Preset 2 Default changed to 60 hz
64-68 Preset 3-7 Default changed to 6 hz
70 Decel Time 2 Default changed to 3.0 sec