Rockwell Automation 1494V-DS600 - Series D Variable Depth Disconnect Switch Kit and Accessories (600A) - Manual (Page 3)

Connecting Rod Installation
First rod connects the handle to the switch
4
Verify that disconnect switch and handle are in "OFF"
position. (Switch blades will be visible)
Drive Bar
1
2
Rotate connecting rod into
drive bar 15 turns.
ATTENTION:
CHECK FOR PROPER OPERATION
8
Second rod provides stiffening for the enclosure flange
4
3
Pull rod up and verify if
rod is 1/2" away from
touching bottom of
spring bracket. (If not,
rotate rod accordingly)
1/2"
Clearance
7
O
P
E
N
QUICK INSTALLATION GUIDE (CONTINUED)
(3)
Connecting
Rod
Hitch Pin
Primary Link
5
6
9
10
11 150 - 200 lb-in
42052-183-01
DIR 42052-183 (Version 03)