Rockwell Automation 1336-RCBL-SP1A Ribbon Cable Kit, 1336-RCBL-SP1A - Manual (Page 2)

2 1336 PLUS, 1336 PLUS II , 1336 FORCE™ & 1336 IMPACT™ Ribbon Cable Kit
3. Open the clamp assembly by triggering the tabs on the non-hinged end of
the case.
4. Install the clamp over the open portion of the cable between the boards as
shown in the following figure. Snap the locking tabs into place to secure
the clamp assembly to the cable.
5. Push the clamp assembly and ribbon cable back between the boards as far
as possible. The cable and clamp must not protrude out to interfere with
the cover.
6. Reinstall the cover on the drive, making certain the cover clears the cable/
clamp assembly during reinstallation.
Figure 1
Ferrite Clamp Installation
Install Clamp
At This Point
Rockwell Automation helps its customers receive a superior return on their investment by bringing
together leading brands in industrial automation, creating a broad spectrum of easy-to-integrate
products. These are supported by local technical resources available worldwide, a global network
of system solutions providers, and the advanced technology resources of Rockwell.
Worldwide representation.
Argentina • Australia • Austria • Bahrain • Belgium • Bolivia • Brazil • Bulgaria • Canada • Chile • China, People’s Republic of • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dominican Republic • Ecuador • Egypt • El Salvador • Finland • France • Germany • Ghana • Greece • Guatemala • Honduras • Hong Kong
Hungary • Iceland • India • Indonesia • Iran • Ireland • Israel • Italy • Jamaica • Japan • Jordan • Korea • Kuwait • Lebanon • Macau • Malaysia • Malta • Mexico
Morocco • The Netherlands • New Zealand • Nigeria • Norway • Oman • Pakistan • Panama • Peru • Philippines • Poland • Portugal • Puerto Rico • Qatar • Romania • Russia
Saudi Arabia • Singapore • Slovakia • Slovenia • South Africa, Republic of • Spain • Sweden • Switzerland • Taiwan • Thailand • Trinidad • Tunisia • Turkey • United Arab Emirates
United Kingdom • United States • Uruguay • Venezuela
Rockwell Automation Headquarters, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414 382-2000, Fax: (1) 414 382-4444
Publication 1336 RCBL-5.0 – April, 1998 P/N 191119(01)
Copyright 1998 Rockwell International Corporation. All rights reserved. Printed in USA.