Rockwell Automation 1609-PXBP External Battery Pack - Manual (Page 3)

1
I
NSTALLATION
Refer to the Safety Instruction sheet included with the UPS before installing the batteries.
Unpacking
Inspect the unit upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose o f it properly.
Check the package contents:
q External battery pack
q Front bezel
q Three tie brackets and six screws
q Product documentation, Safety Guide
q Bulletin 1609-P Series User Manual CD
Environmental Specifications
T EMPERATURE
O PERATING
S TORAGE
32
°
to 104
°
F (0
°
to 40
°
C)
-4
°
to 140
°
F (-20 to 60
°
C) charge UPS battery every six months
M AXIMUM
E LEVATION
O PERATING
S TORAGE
10,000 ft (3,000 m)
50,000 ft (15,000 m)
H UMIDITY 0% to 95% relative humidity, non-condensing
This unit is intended for
indoor use only. Select a
location sturdy enough to
handle the weight.
Do not operate the UPS where
there is excessive dust or the
temperature and humidity are
outside the specified limits.
Ensure the air vents on the
front and rear of the unit are
not blocked.