Rockwell Automation 1492-IFM20FN_RIFM20FN_IFM20D24N_IFM20D120N Narrow Standard Interface Modules - Manual (Page 5)

PN-244747
DIR 40063-293 (Version 17)
(5)
Specifications
Spécifications
Technische Daten
Specifiche
Especificaciones
2 Amps 12 Amps
12 Amps
12 Amps
N/A
N/A
Operating Temperature Range
Plage températures de fonctionnement
Betriebstemperaturbereich
Limiti temperatura di funzionamento
Rango de temperatura de funcionamient
Indicator Circuit Current
Courant circuit voyants
Strom, Anzeigeschaltkreis
Corrente circuito indicatori
Intensidad del circuito
de indicadores
Current/Circuit
Courant/Circuit
Strom/Schaltkreis
Corrente/circuito
Intensidad/circuito
Current/Module
Courant/Module
Strom/Modul
Corrente/modulo
Intensidad/módulo
Voltage Range
Tension
Spannung
Tensione
Voltaje
Catalog No.
Référence
Bestell-Nr.
N. Catalogo
Referencia
Dimensions
Dimensions
Abmessungen
Dimensioni
Dimensiones Approx. Shipping Weight
Poids d'embarquement approximatif
Ungefähres Versandgewicht
Peso approssimativo del carico
Peso aproximado al momento de
embarque
Operating Humidity
Humidité relative
Betriebsluftfeuchtigkeit
Umidità di esercizio
Humedad operativa
Catalog No.
Référence
Bestell-Nr.
N. Catalogo
Referencia
Maximum Recurring Peak Voltage

Tension de crele réurrente maximale
Maximale periodische Hochstspannung
Tensione massima di cresta ricorrente
Voltaje de cresta iterativo máximo
600 V p

600 V p

600 V p

Standards
Normes
Standards
Standard
Estándares
Ratings when used with 1764-24AWA, 1764-24BWA outputs. (For inputs use 2 Amps current per circuit.)
Ratings when used with 1764-28BXB outputs. (For inputs use 2 Amps current per circuit.)
1492-IFM20FN
1492-RIFM20FN
1492-IFM20FN
1492-RIFM20FN
0-132 VAC
10-125 VDC
0-132 VAC
10-125 VDC
24 VDC
Out 0 - 3, 2 Amps
Out 4 - 11, 1 Amps
Out 0 - 1, 2 Amps
Out 8 - 11, 1 Amps
Out 2 - 7, 0.5 Amps
Reference Publications: Refer to 1770-4.1 and appropriate PLC I/O module installation manual.
SURGE SUPPRESSION follow the literature recommendations of the PLC module being used.
La section SUPPRESSION DES SURTENSIONS se trouve à la suite de la littérature qui contient les recommandations relatives au module PLC utilisé.
ÜBERSPANNUNGSSCHUTZ Bitte beachten Sie die Dokumentationsempfehlungen für das jeweils benutzte SPS-Modul.
Per la SOPPRESSIONE DEI PICCHI TEMPORANEI, seguire le istruzioni riportate nella documentazione in dotazione al Modulo PLC utilizzato.
SUPRESIÓN DE SOBRETENSIÓN, siga las recomendaciones indicadas en la documentación del módulo PLC respectivo.
 For transients > 600 Vp use a UL recognized suppression device rated at 2.5 kV withstand.
Pour des transitoires > 600 Vp utilisez un dispositif de suppression certifié UL à 2,5 kV nominal de tenue.
Für Einschaltstöße > 600 Vp verwenden Sie einen UL anerkannten Entstörer, der bewertet wurde bei 2,5 kV standzuhalten.
Per transitori > 600 Vp usare dispositivo di soppressione riconosciuto da UL capace di sopportare 2,5 kV.
Para transitorios > 600 Vp use un dispositivo de supresión reconocido UL clasificado con 2,5 kV.
 Non-condensing
Sans condensation
Nicht kondensierend
Senza condensa
sin condensación
 Power, input and output (I/O) wiring must be in accordance with Class I Division 2 wiring methods - Artticle 501-10(B)(1) of the National Electrical Code.
 Add 0.39 in. to the width dimension for 1492-Rxx type modules.
WARNING Explosion Hazard - substitution of components may impair suitability for Class I Division 2.
Explosion Hazard - Do Not Disconnect Equipment unless power has been switched off or the area is known to be Non-Hazardous.
1492-IFM20FNH 0-132 VAC/DC
1492-RIFM20FNH 0-132 VAC/DC
N/A
N/A
Width Height Depth
1492-IFM20FN, -RIFM20FN 2.36 in. (60mm) 3.27 in. (83mm)
1492-IFM20FNH, -RIFM20FNH 2.76 in. (70mm) 2.78 in. (70.5mm)
1492-IFM20D24N 2.36 in. (60mm) 3.27 in. (83mm)
1492-IFM20D120N 2.36 in. (60mm) 3.27 in. (83mm)
0° C - 60° C 5 - 95%
0.56 lb.
(255 g.)
2.78 in.
(70.5mm)
cULus (File: E10314, Guide No. NRAG)
Suitable for use in Class 1 Div 2 Groups A, B, C and D
Hazardous and Non-Hazardous LocaƟons.
Temperature Code = T3C at 60°C
CE: Compliant for all applicable direcƟves
FM Class 1 Div 2 Groups A, B, C and D
Temperature RaƟng T3C = 60°C (J.I. 3000590)
4
5
6
6 No FM certification for this type of module.