Rockwell Automation 1492-CM1771-LD0010F Fused Field Conversion Module - Manual (Page 3)

(3)
Specification
Dimensions
Approximate Shipping Weight
11.81 in. (height) x 4.38 in. (depth) x 1.5 in. (width)
300 mm. (height) x 111.25 mm (depth) x 38.1 mm (width)
271.9 g (0.60 lbs) (includes carton)
Storage Temperature -40 to +85°C (-40 to +185°F)
Operating Temperature 0 to 60°C (32 to 140°F)
Operating Humidity 5 to 95% at 60°C (non-condensing)
Shock
Non
-
operating
Operating
50g
30g
Operating Vibration 2g at 10 to 500Hz (Agrees with 1756 I/O module specifications)
Maximum Operating Voltage 132 Vac at 47 to 63Hz
Max. Module Operating Current
Per Point:
Per Module:
1 Amp
4 Amps
4 Amps
Agency Certifications
UL Classified: Under UL File Number E113724
CSA
CE: compliant for all applicable directives
Pollution Degree 2
Environmental Rating IP20
Refer to the Wiring Diagram(s) for
current limits for a specific configuration. NOTICE
Value
Fusing Sixteen, 1.5 Amps (maximum current based on convension
components)
PN-114282
DIR 10000060093 (Version 01)
Publication 1492-IN040B-EN-E
IV. Conversion Module Specifications
(Operating specifications are when installed in the Conversion System base / cover-plate assembly)
Table 2: Bulletin 1771 to 1756 Conversion Modules and Cables
III. Compatibility
Foot Notes:
To understand any issues concerning I/O module compatibility, refer to the Installation Manuals for the specific 1771
and 1756 I/O modules involved.
The 3 numbers indicate the cable length of each portion of the 1492 Cable. Recommended cable lengths of 0.5M
are shown. Additional cable lengths are as follows:
1.0M = 1492-CONCAB010Y
1771
Digital I/O Module
1756
Digital I/O Module
1492
Conversion Module
1492
Cable
1771-ODD 1756-OA16I 1492-CM1771-LD010F 1492-CONCAB005Y
1771-OQ16 1756-OB16I 1492-CM1771-LD010F 1492-CONCAB005Y
1771-OD16 1756-OA16I 1492-CM1771-LD010F 1492-CONCAB005Y