Rockwell Automation 1326AB_AB-MOD-V Resolver Feedback Package - Manual (Page 2)

1326AB Resolver Feedback Package
Instructions
4. Attach the gasket to the resolver housing.
5. If the resolver is being mounted to a 1326AB-Bxx or Cxx series
servomotor, the 1326AB-MOD-Mxx Mounting Adapter must be
installed at this point.
6. Insert the resolver shaft into the coupling. Fasten the resolver housing
to the motor using the three screws and lockwashers supplied.
7. Remove the plastic plugs from the two threaded resolver ports. Rotate
the coupling in relation to the unfastened shaft, allowing the coupling
to seek a normal resting position.
Important: Assure that the coupling is not compressed or stretched
after it has reached its normal aligned position.
8. Fasten the coupling to the resolver shaft through the port(s).When
tightening, use no more than 16-18 lb.-in. (1.8-2.0 N-m) of torque.
Assure that light can clearly be seen between all coupling spacings.
9. Connect the appropriate Allen-Bradley 1326-CVU cable to the
threaded resolver connector.
10. Check for proper operation.
Publication 1326A-5.21 – May, 1994 P/N 163094
Copyright 1994, Allen-Bradley Company, Inc. Printed in U.S.A.
Algeria • Argentina • Australia • Austria • Bahrain • Belgium • Brazil • Bulgaria • Canada • Chile • China, PRC • Colombia • Costa Rica • Croatia • Cyprus • Czech Republic
• Denmark • Ecuador • Egypt • El Salvador • Finland • France • Germany • Greece • Guatemala • Honduras • Hong Kong • Hungary • Iceland • India • Indonesia • Israel •
Italy • Jamaica • Japan • Jordan • Korea • Kuwait • Lebanon • Malaysia • Mexico • New Zealand • Norway • Oman • Pakistan • Peru • Philippines • Poland • Portugal •
Puerto Rico • Qatar • Romania • Russia–CIS • Saudi Arabia • Singapore • Slovakia • Slovenia • South Africa, Republic • Spain • Switzerland • Taiwan • Thailand • The
Netherlands • Turkey • United Arab Emirates • United Kingdom • United States • Uruguay • Venezuela • Yugoslavia
World Headquarters, Allen-Bradley, 1201 South Second Street, Milwaukee, WI 53204 USA, Tel: (1) 414 382-2000 Fax: (1) 414 382-4444
Allen-Bradley has been helping its customers improve productivity and quality for 90 years. We
design, manufacture and support a broad range of control and automation products worldwide.
They include logic processors, power and motion control devices, man-machine interfaces,
sensors and a variety of software. Allen-Bradley is a subsidiary of Rockwell International, one of
the world’s leading technology companies.
With major offices worldwide.