Rockwell Automation 1426-MxE-xxx PowerMonitor 5000 Unit Firmware Revision Update Installation Instructions User Manual
Page 10
10
Rockwell Automation Publication 1426-IN004A-EN-P - December 2013
PowerMonitor 5000 Unit Firmware Revision Update
6. In RSLinx software, navigate to the IP address of the device over the
Ethernet
network, select the device, and click OK.
To update the firmware revision over the ControlNet or DeviceNet
network, navigate to the device through the network scanner in the RSLinx
software window.
To update the firmware revision via a USB connection, an RNDIS driver
must be installed. Refer to the PowerMonitor 5000 USB Driver
Installation and Configuration Installation Instructions, publication
TIP
RSLinx Classic Lite software must be installed to continue with the upgrade
process.
TIP
To access the device IP address, the IP address must be added to the Ethernet
device’s driver address list in RSLinx software.