Rockwell Automation 1202-TB-KIT-SET DPI Screw Terminal Adapter - Manual

DPI Screw Terminal Cable Adapter Kits
Installation Instructions
Items Included with each Kit
Important: When using the Adapter-Only Kit (Catalog # 1202-TB-KIT-SET), we have tested and recommend using a cable sold by
Quabbin (p/n 2906), or equivalent. The Quabbin cable is an equivalent to the cable supplied in the Full Kit (Catalog # 1202-
CBL-KIT-100M) except that it has different wire pair colors (see
Table 1 on back page) and a foil shield.
DPI Cable Requirements/Recommendations
1. The maximum cable distance between a DPI peripheral and DPI host is:
2. The maximum DPI cable length is the SUM of all connected cables between the drive and peripherals(s). This includes all cables
connected via the DPI Screw Terminal cable, 1203-S03 splitter cable, and 1203-SG2/1203-SG4 expander modules.
3. The installer must follow common system wiring practices and route cables away from sources of EMI, such as drive input power and
motor cables.
Full Kit
Catalog # 1202-CBL-KIT-100M
Adapter-Only Kit
Catalog # 1202-TB-KIT-SET
Qty. Item Description Qty. Item Description
2 8-pin MiniDIN-to-Screw Terminal Adapter 2 8-pin MiniDIN-to-Screw Terminal Adapter
1 Mini-screwdriver (fits screw terminals) 1 Installation Instructions (this sheet)
1 Wire Strip Tool (for stripping 26 AWG wire ends) NOTE: The Adapter-Only Kit is provided so additional cable
assemblies can be made with the 100 meter cable supplied
in the Full Kit. It can also be used by customers that already
have the tools and purchase their cable separately.
100 m Cable (26 AWG x 4 twisted and shielded pairs)
1 Installation Instructions (this sheet)
• 75 meters with 500 kbps DPI data rate
• 100 meters with 125 kbps DPI data rate
Screw Terminal
Cable Adapter 20-HIM-C3S
20-HIM-C5S
20-HIM-B1 20-HIM-C3S
20-HIM-C5S
20-HIM-B1
Cable Length Calculations:
• (1) 1203-S03 + (4) Screw Terminal Cable Adapters = 1.5 m (5 x 0.3 m)
• 100 m maximum - 1.5 m = 98.5 m additional cable length allowed
• 98.5 m ÷ 2 peripherals = 49.25 m each if equi-distant lengths are desired (not required)
1203-S03
Splitter Cable
49.25 m 49.25 m
DPI @ 125 kbps
0.3 m
0.3 m 0.3 m 0.3 m 0.3 m
Example
Screw Terminal
Cable Adapter