Specifications – Rockwell Automation 1414-INZ10ZXPBP,,1414-CNZ10ZXPBP Electronic to Pneumatic Transducer User Manual
Page 6
6 Electronic to Pneumatic Transducer
Publication 1414-IN006A-EN-P - October 2005
Specifications
Electronic to Pneumatic Transducer Specifications
Specification
Value
Input Signal
4…20mA, 0…10V dc jumper selectable
Input Impedance
4…20mA input, 400
Ω minimum, 550 Ω maximum
Power Supply
4…20mA input, Loop powered; 1.0 Watt maximum
Air Supply
138 kPa (20 psig) nominal, 207 kPa (30 psig) maximum Clean, dry, oil-free
air required.
Air Consumption
5.66 ml/s (0.012 scfm) @ 138 kPa (20 psig) supply, maximum
Output Air Capacity
141 ml/s (515 scim) maximum @ 138 kPa (20 psig) supply
Air Connections
Male barbed fittings for flexible 1/4” OD pneumatic tubing
Wiring Connections
Screw terminals for 14 … 22 AWG wire
Output Signal
21…103 kPa (3-15 psig) nominal, direct acting
Manufacturing Process
ISO 9002 certified
Linearity ±1%
of
span
Hysteresis
±1% of span
Adjustments
Zero and span potentiometers
Operating Temperature
0°C … 60°C (32°F … 140°F)
Operating Humidity
5…95% RH, non-condensing
Dimensions H x W x D (Snap-Track
model)
83mm x 70mm x 50mm (3.25” x 2.75” x 2”)
Dimensions H x W x D ABS model)
116mm x 84mm x 53mm (4.55” x 3.3” x 2.1”)