Run system tests, Figure 30 - system tests, Diagnostics mode – Rockwell Automation 1608M MegaDySC User Manual, 400 A User Manual
Page 38: Run system tests diagnostics mode
Advertising
38
Rockwell Automation Publication 1608M-UM001A-EN-P - September 2013
Chapter 6
Display Screen
Run System Tests
Press the “RUN SYSTEM TESTS” to enter the “System Tests” screen. Press “2
MINS” to run the system fans for 2 minutes (See
).
Figure 30 - System Tests
Diagnostics Mode
This is not a user function. It is numerical code protected for authorized service
personnel.
Advertising