Rockwell Automation 1305 CONFIG. DRIVE - Manual

Configurable AC Drive Packages
Flexibility with Definition
1305 Configured AC Drives Program
The heart of every configured drive
package is a 1305 variable frequency
controller. The 1305 is a microprocessor-
based adjustable-frequency AC drive
which provides exceptional reliability
when controlling 3-phase motors,
producing a 3-phase, PWM, adjustable
frequency & voltage output to control
motor speed & torque.
• Per the "Electrical Construction and Maintenance Handbook for Estimating Electrical
Work", for every hour needed to install a combination unit, 1.65 hours are required to
install a drive and a disconnect, each separately mounted.
• Installing a single unit eliminates the need to mount and interwire separate enclosures.
It also eliminates the miscellaneous hardware associated with installing two separate
devices.
L o w e r I n s t a l l e d C o s t
• Automated Engineering
– Products "engineered" quickly via software written and maintained by Application
Engineering.
– Bills of Materials, assembly instructions, wiring diagrams, programming instructions,
etc. generated on demand, and electronically transmitted to assembly area
Q u i c k D e l i v e r y
• Unit is pre-programmed (based on options ordered) and ready to install
• Single source application support
• Tested and documented unit
S i n g l e S o u r c e P a c k a g i n g R e s p o n s i b i l i t y
The Configured IP65 (NEMA Type 4/12) 1305 Device offers:
• Lower installed cost
• Quick delivery
• Single source packaging responsibility
• Prewired Disconnect
• Quick information turnaround
B e n e f i t s
• Article 430 of the U.S. National Electrical Code requires a disconnect means
for motor applications.
– Having the disconnecting prewired simplifies drive installation.
The disconnect switch is designed to meet disconnect switch
requirements for branch circuit protection.
P r e w i r e d D i s c o n n e c t
1 3 0 5 A C D r i v e