Rockwell Automation 1336S PLUS to PLUSII Upgrade Inst. - Manual

Instructions
This publication will guide you through the steps required to convert a 1336
PLUS Adjustable Frequency AC Drive to a 1336 PLUS
II . Performing this
conversion will provide you with the updated features of the 1336 PLUS II
Drive.
The upgrade can only be performed on the following 1336 PLUS Drives:
• IP00 (Open Type) A-G Frame Drives
• IP20 (NEMA Type 1) A-C Frame Drives
Please note that the upgrade can not be performed on D-G Frame IP20
(NEMA Type 1) Drives.
Items included in the kit include:
Required Tools • #2 Phillips Screwdriver
• Medium Flat Blade Screwdriver
• VOM or other voltage checking device
Conversion Procedure
Item
Quantity/Kit
1336F-UPGRA 1336F-UPGRB
Main Control Board 1 1
HIM and HIM Cradle 1 1
1336 Plus II User Manual 1 1
Plus II Labels, Front Cover 1 1
Plus II Upgrade Sticker 1 1
Wrist Strap 1 1
Terminal Guard, Clear 1 –
Screws, HIM 4 4
Screws, Main Control Board 6 9
!
ATTENTION: The drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are
required when installing, testing, servicing or repairing this
assembly. Component damage may result if ESD control
procedures are not followed. If you are not familiar with static
control procedures, reference publication 8000-4.5.2, “Guarding
Against Electrostatic Damage” or any other applicable ESD
protection handbook.
!
ATTENTION: To avoid a shock hazard, assure that all power to
the drive has been removed before proceeding. In addition, verify
that the DC bus has discharged by measuring across the “+DC”
and “–DC” terminals of TB1 with a voltmeter. The voltage should
be 0.0VDC.
Upgrading the 1336 PLUS AC
Drive to a 1336
PLUS II
1336F-UPGRA & 1336F-UPGRB