Outgoing messages – BT Freestyle 650 User Manual

Page 30

Advertising
background image

The answering machine is pre-set
to Answer and Record mode.

Cancel operation

Press

to end any operation at

any time.

Loudspeaker volume

You can adjust the base
loudspeaker volume at any time. In
standby, you hear a beep which
gets louder or softer. A double
beep signifies the highest or lowest
setting. Use the

and

buttons.

Stop

to delete all messages; or

to cancel message deletion. This will also restore

any messages you have selected individually for deleting.
Any messages not deleted are saved.

You will hear a beep to signal when 8 seconds have
elapsed.

Outgoing messages

The outgoing message (OGM) is the greeting a caller
hears when the answering machine picks up their call.
Your BT Freestyle 650 gives you a choice of two pre-
recorded outgoing messages, one for Answer and
Record and one for Answer Only.

Answer and Record

Callers hear the announcement and are able to leave a
message for you. The pre-recorded message is,
“Hello,
your call cannot be taken at the moment, so please leave
your message after the tone.”

Answer only

Callers hear an announcement but cannot leave a
message. The pre-recorded message is,
“Hello, your call
cannot be taken at the moment, and you cannot leave a
message, so please call later.”

Stop

Del

30

Using the answering machine

Freestyle 650 – Edition 2 – 30.03.06 – 7335

If you experience any problems, please call the Helpline on 0870 605 8047

Personalise your OGM

To record your own outgoing
message, see ‘Record your own
outgoing message’,
see page 31.

Advertising