Bose AM316835 User Manual
Bose Headphones
Advertising
Table of contents
Document Outline
- 00_Yoda_Cell_Cover-5x3.pdf
- 01_Yoda_Cell_ENG
- Welcome
- Large (black)
- Correct
- Adjusting for comfort and stability
- 1. Attach the headset cord through the right (R) and left (L) lanyard connectors below the microphone and approximately 10 inches (25.4 cm) below each ear piece.
- 2. Pull the lanyard over your head and allow it to rest behind your neck.
- 3. Adjust the lanyard connectors have enough slack above the lanyard connectors so that any downward pulls on the plug end of the cord are not felt in the ears.
- Troubleshooting
- Cleaning
- Limited Warranty
- 1. Visit http://global.Bose.com or contact your local authorized Bose dealer to identify the location of the nearest authorized Bose service facility;
- 2. Contact the authorized service facility for specific return and shipping instructions;
- 3. Label and ship the product, freight prepaid, to the address provided by the authorized service facility; and
- 4. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused.
- Adjusting for comfort and stability
- 02_Yoda_Cell_DAN_print
- 03_Yoda_Cell_DEU_print
- 04_Yoda_Cell_ESP_print
- 05_Yoda_Cell_FIN_print
- 06_Yoda_Cell_FRA_print
- 07_Yoda_Cell_HUN_print
- 08_Yoda_Cell_ITA_print
- 09_Yoda_Cell_NED_print
- 10_Yoda_Cell_POL_print
- 11_Yoda_Cell_SVE_print
- 01_Yoda_Cell_THA_Prn
- 13_Yoda_Cell_KOR_print
- 14_Yoda_Cell_SCH_print
- 15_Yoda_Cell_TCH_print
- 01_Yoda_Cell_ARA_Print_Rev
- 15_Contact.pdf
- AM316835_00_viewable.pdf
- 00_Yoda_Cell_Cover-5x3.pdf
- 01_Yoda_Cell_ENG
- Welcome
- Large (black)
- Connecting to a mobile phone or audio device
- 1. Plug the headset into the headphone/headset jack on the phone.
- 2. Put on the headset.
- 1. Select the appropriate adapter.
- 2. Attach the adapter to the headset cable
- 3. Plug the headset with the adapter into the headphone/ headset jack on the phone.
- 4. Put on the headset.
- Answering and ending calls
- Using a single earpiece
- Importance of Proper Fit
- Connecting to a mobile phone or audio device
- Correct
- Adjusting for comfort and stability
- 1. Attach the headset cord through the right (R) and left (L) lanyard connectors below the microphone and approximately 10 inches (25.4 cm) below each ear piece.
- 2. Pull the lanyard over your head and allow it to rest behind your neck.
- 3. Adjust the lanyard connectors have enough slack above the lanyard connectors so that any downward pulls on the plug end of the cord are not felt in the ears.
- Troubleshooting
- Cleaning
- Limited Warranty
- 1. Visit http://global.Bose.com or contact your local authorized Bose dealer to identify the location of the nearest authorized Bose service facility;
- 2. Contact the authorized service facility for specific return and shipping instructions;
- 3. Label and ship the product, freight prepaid, to the address provided by the authorized service facility; and
- 4. Place any necessary return authorization number prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused.
- Adjusting for comfort and stability
- 02_Yoda_Cell_DAN_print
- 03_Yoda_Cell_DEU_print
- 04_Yoda_Cell_ESP_print
- 05_Yoda_Cell_FIN_print
- 06_Yoda_Cell_FRA_print
- 07_Yoda_Cell_HUN_print
- 08_Yoda_Cell_ITA_print
- 09_Yoda_Cell_NED_print
- 10_Yoda_Cell_POL_print
- 11_Yoda_Cell_SVE_print
- 01_Yoda_Cell_THA_Prn
- 13_Yoda_Cell_KOR_print
- 14_Yoda_Cell_SCH_print
- 15_Yoda_Cell_TCH_print
- 01_Yoda_Cell_ARA_Print_Rev
- 15_Contact.pdf
- Australia
- Belgique/Belgie
- China
- Denmark
- Deutschland
- France
- India
- Ireland
- Italia
- Japan
- Mexico
- Nederland
- New Zealand
- Norge
- Österreich
- Schweiz
- Sverige
- United Kingdom
- Hong Kong
- Finland
- Poland
- Canada
- USA
- World Wide Web