Battery modules, Description, Specification quick reference – Rockwell Automation 1606XLSBATBR2 Power Supply Reference Manual User Manual

Page 2: Catalog numbers, Certification marks

Advertising
background image

All parameters are specified at 25°C ambient unless noted otherwise.

2

Rockwell Automation Publication 1606-RM040A-EN-P — April 2014

Bulletin 1606 Switched Mode Power Supplies

Battery Modules

A modular concept allows the user to meet individual
application demands and is available with two different
options:
You can order the module with an assembled battery or
you can choose only the bracket allowing the mounting
of individual batteries. The mounting bracket allows you
to assemble the battery just in time, thus avoiding
problems with outdated batteries due to limited shelf life.

Long life battery: 10 to12 years

Easy access to the terminals and the fuse

Description

Specification Quick Reference

Battery

Maintenance free valve regulated lead acid battery
Battery voltage nom 12Vdc
Battery capacity nom 26Ah
Self-discharge typ

3%/ month at 20°C

Design life (EUROBAT) 10 to 12 years

Fuse

Blade terminal fuse

nom 30A ATO

®

)

e

s

u

f

l

e

t

t

i

L

0

3

0

7

5

2

(

Terminals and Wiring

Type Screw terminals
Solid wire nom 2.5-4mm

2

Stranded wire nom 2.5-4mm

2

American wire gauge max 12 AWG
Wire stripping length nom 7mm / 0.275”
Tightening torque nom 0.8Nm / 7lb.in

Ambient Temperature

Operation min +0°C to +40°C
Storage and transport min -20°C to +50°C

Instructions for Use and Disposal of the Battery

Place the battery module outside the cabinet or in the
coolest area when used inside the cabinet.
Use wires no smaller than 2.5mm

2

(or 12 AWG) and not

longer than 2x1.5m (cord length 1.5m).
Disconnect battery fuse before working on the battery
or on the DC-UPS.
For storage, installation and operation, the
requirements of the EN 50272-2 as well as other
national regulations must be observed.
Ensure sufficient ventilation for the battery.
Always dispose of the batteries through a recycling
organisation. Batteries must be complementely discharged
before recycling.

Dimensions and Weight

(1606-XLSBATASSY2)

Width nom 214 mm / 8.43“
Height nom 179 mm / 7.05“
Depth nom 158 mm / 6.22“
Weight max 9920g / 21.83lb

Warranty

3 Year limited warranty except battery as battery is
considered as a service part. Special conditions are part of
our general terms and condit ions. Do not store the
battery longer than 9 month without supplementary
charge or performance might change.

Catalog Numbers

Certification Marks

1606-XLSBATASSY2

Battery module

1606-XLSBATBR2

Mounting kit without battery

1606-XLSBAT2

Battery

replacement

GL

Marine

Battery, terminal block,

cables, fuse and fuse

holder are UL-approved
components.

GOST R

Advertising