Rockwell Automation 1494F-D30_D60_D100_D200 Disconnect Switch (30A / 60A / 100A / 200A) - Manual (Page 8)

42052-042-01
DIR 42052-042 (Version 04)
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Publication 1494F-IN012D-EN-E - January 2013
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Testing of Disconnect Switch
1. Verify that both the disconnect switch and the disconnect handle are in the OFF position. (the disconnect switch can be moved into the OFF position by moving the crossbar downward so that the blades are exposed)
2. To test that the disconnect switch and the mechanism are properly aligned. Verify that the disconnect switch can be turned on by moving the defeater lever downward and moving the disconnect handle to
the ON position (the blades should enter the disconnect switch arc hood).
3. Verify that the disconnect switch can be turned off by moving the disconnect handle to the OFF position (the blades should exit the disconnect switch arc hood).
Fuse Cover Installation
Size 0 - 3
Size 4
200 A, 600 V, Class H, R Fuses
30 A, 60 A, 100 A Non-Fused
30 A, 250 V, Class H, R Fuses
30 A, 600 V, Class H, R Fuses
60 A, 250 V, Class H, R Fuses
60 A, 600 V, Class H, R Fuses
100 A, 600 V, Class H, R Fuses
100 A, 250 V, Class H, R Fuses
200 A, 250 V, Class H, R Fuses
200 A, 600 V, Class J Fuses
Cat 1495-N58
Non-Fused
200 A, 250 V, Class H, R Fuses
200 A, 600 V, Class H, J, R Fuses
1
2
2
1
1
1
Click
2
3
3
Click