Rockwell Automation 1336-SN-SP19A Snubber Board Kit, 1336-SN-SP19A User Manual
Page 19
Advertising
1336-5.49 – August, 1999
I-19
1. Remove power from the drive.
2. Open the Enclosure door.
3. Check for zero volts at the +DC/-DC Brake Terminals and for the
absence of control voltage.
4. Remove the four nuts fastening the High Voltage Guard to the
standoffs.
5. Pull the guard away from the drive.
Drive shown with door open, sides removed.
Advertising