Rockwell Automation 1426-COMM-CNT PowerMonitor 5000 Unit Optional Communication Modules - Manual (Page 5)

Rockwell Automation Publication 1426-IN002A-EN-P - April 2013 5
PowerMonitor 5000 Unit Optional Communication Modules
Replace a Communication
Module
Follow these steps to replace a communication module.
1. Disconnect control and voltage sensing power from the power monitor.
2. With a Torx 8 screwdriver, back out the fastening screws approximately
4 mm (0.16 in.).
Do not remove the screws.
3. Gently remove the communication module from the power monitor.
4. Install the new communication module by following steps 3…7 under
Install a Communication Module on page 3 .
Additional Resources These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
http:/www.rockwellautomation.com/literature/ . To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Step 2 Use Torx 8
Screwdriver
Step 2 Back out
approximately
4 mm
(0.16 in.)
Step 3 Remove the
communication
module.
Resource Description
PowerMonitor 5000 Unit User Manual, publication
1426-UM001
Provides information on installing, configuring, and
using the PowerMonitor 5000 unit.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing a Rockwell
Automation® industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and
other certification details.