Behringer GUITAR AMPLIFIER GTX60 - Manual (Page 7)

7 GUITAR AMPLIFIER GTX60/GTX30 User Manual
3. Application Example
The GUITAR COMBO features plenty of connectors for a wealth of applications.
Here is an example of how flexible your GUITAR COMBO can be:
Drum Computer
CD Player
BEHRINGER
VIRTUBE GTX60
Electric Guitar
CD In
Footswitch
BEHRINGER
HPS3000
Fig. 3.1: GTX60 standard setup
For practicing in the rehearsal room or at home, please wire your GUITAR COMBO
as shown in fig. 3.1. Connect a CD player or drum machine to the CD IN input.
If you want to practice with headphones, connect your headphones to the
LINE OUT/PHONES jack. The built-in loudspeaker will be muted automatically.
Connect the dual footswitch supplied with the unit to the FOOTSWITCH jack on
the GUITAR COMBO. The CHANNEL footswitch switches between the channels.
The IN/OUT footswitch turns the effect on and off (GTX60 only).
4. Installation
Except for the headphones output and the CD IN input (1/4" TRS connectors),
all audio inputs and outputs on the BEHRINGER GUITAR COMBO are
1/4" TS connectors. Please see Chapter 5, “Specifications” for more information.
◊ Please ensure that the unit is installed and operated only by people
qualified to do so. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic discharge may affect
the operation of the unit.
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 4.1: 1/4" TS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
¼" TRS headphones connector
ring
right signal
tip
left signal
Fig. 4.2: 1/4" TRS connector
R
L
R
L
ring
tip
sleeve
tip
tip
sleeve
sleeve
Fig. 4.3: Stereo adapter cable
sleeve sleeve
tip tip
Fig. 4.4: Mono adapter cable