Rockwell Automation 1326AB, 845H Encoder Feedback Adapter Kit User Manual
Page 3
Advertising
1326A Encoder Feedback Mounting Adapter
Instructions
3
o
8. Tighten the coupling onto the encoder shaft. Replace inspection plug.
Important: Assure that the coupling is not compressed or stretched
after it has reached its normal aligned position.
o
9. Check for proper operation.
845H
Encoder
845H Mounting
Servo Clamp
Faston Type
Connector
Access to Coupling
1326AB Motor
Coupling
3.25" (82.6 mm) Maximum for All Motors
Adapter
Advertising