Rockwell Automation 1336E IMPACT Language Module Replacement User Manual
Page 2
2
1336 IMPACT
™
AC Drive Language Module Installation/Replacement
3. Remove the module by squeezing the sides - in, and pulling outward.
Discard module.
4. Position the new Language Module on the Main Control Board,
using the silk screen outline on the board as a guide.
5. Carefully align the module connector with the Main Control Board
connector. Firmly press the module onto the board until fully seated.
The module will “snap” (lock) in place.
6. Replace drive cover and restore power to the drive. If a fault occurs,
reset parameters to the factory default values - then, clear the fault
by pressing the Stop key or cycling power. The drive may now be
programmed as required.
LANGUAGE MODULE
ALLEN-BRADLEY
LANGUAGE MODULE
ALLEN-BRADLEY
Publication 1336 IMPACT-5.2 – May, 1997
P/N 74103-710-01 (A)
Copyright 1997 Rockwell International Corporation. All rights reserved. Printed in USA.