Rockwell Automation 1494C-xxx Cable Operated 30A / 60A / 100A Disconnect Switch User Manual

Product information

Advertising
background image

Product Information

Bulletin 1494C Cable Operated 30A, 60A, 100A Disconnect Switch

(For use with Cat 1494F-D30; 1494F-DX30; 1494F-D60; 1494F-DX60; 1494F-D100; 1494F-DX100 - Series D)

Additional Resources:
1) Go to http://www.literature.rockwellautomation.com 2) Go to Search. Type in publication number: 42052-123-01

Disconnect Switch Installation (Right hand installation shown. For left hand installation follow similar procedure.)

1

Enclosure with Right Hand Flange

5-1/4"

2-1/4"

11/64"

Dia.

12" Minimum

Locate switch with right hand mechanism.

1

1

2

Disconnect Switch with

Right Hand Cable Mechanism

(shown)

Assemble disconnect switch to cable switch
mechanism.

Assemble disconnect switch assembly to
mounting plate.

23 - 37 lb-in

23 - 37 lb-in

Thread forming
(TAP-TITE) screws
provided with cable
mechanism.

Thread forming
(TAP-TITE) screws
provided with
disconnect switch.

2

3

3

NOTE: For switch with left hand mechanism or
enclosure with left hand flange, reference installation
instruction sheet 42052-123-01

Disconnect Handle Installation

2

Install gasket.

Install handle and spring bracket.

Install defeater lever.

30 - 40 lb-in

7 - 11 lb-in

(Right Hand
Flange Mounted
Shown)

ATTENTION: Do not install, configure, operate or maintain this product until you have read the product documentation and the documents in the Additional Resources section for installing, configuring, operating or maintaining
equipment. To get the product documentation go to http://www.literature.rockwellautomation.com or contact your local sales office or Rockwell Automation representative.
ATTENTION: Ne pas installer, configurer, exploiter ou maintenir ce produit tant que vous n’avez pas lu sa documentation et les documents de la rubrique Documents connexes pour l’installation, la configuration, l’exploitation et la
maintenance de l’équipement. Pour obtenir de la documentation, rendez-vous sur le site http://www.literature.rockwellautomation.com ou contactez votre agence commerciale Rockwell Automation locale ou son représentant.
ACHTUNG: Für die Installation, Konfiguration, den Betrieb und die Wartung dieses Produkt lesen Sie sich bitte zunächst die Produktdokumentation sowie die Dokumente im Abschnitt „Weitere Informationen“ durch. Die
entsprechende Produktdokumentation finden Sie unter http://www.literature.rockwellautomation.com oder kontaktieren Sie Ihr lokales Vertriebsbüro bzw. einen Rockwell Automation-Mitarbeiter.
ATENCIÓN:

No instale, configure, opere ni mantenga este producto hasta que haya leído la documentación del producto y los documentos en la sección Recursos adicionales para la instalación, configuración, operación o

mantenimiento de equipo. Para conseguir la documentación, diríjase a http://www.literature.rockwellautomation.com o póngase en contacto con su oficina regional de ventas o representante de Rockwell Automation.
ATENÇÃO: Não instale, configure, opere ou mantenha este produto até que você leia a documentação do produto e os documentos na seção Recursos adicionais para a instalação, configuração, operação ou manutenção do
equipamento. Para conseguir a documentação, visite http://www.literature.rockwellautomation.com ou entre em contato con seu escritório de vendas regional ou representante da Rockwell Automation.
ATTENZIONE:

Non installare, configurare, attivare o riparare questo prodotto senza avere prima letto la relativa documentazione nonchè i documenti indicati nella sezione Ulteriori Risore riguardanti l’installazione, la configurazione,

l’attivazione o la riparazione dell’apparecchiatura. Per la documentazione sul prodotto visitare il sito http://www.literature.rockwellautomation.com o contattare l’ufficio vendite o il rappresentate Rockwell Automation di zona.

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
The following procedures are critical to the proper operation of the disconnect handle and switch. Failure to follow these steps can result in damage to the equipment and/or serious injury or death to the operator.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or damage,
no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

http://www.literature.rockwellautomation.com

http://www.literature.rockwellautomation.com

http://www.literature.rockwellautomation.com

Advertising